Anyone help with small bit of welding?

Put your recommendations for services in this area. No negative or defammatory comments allowed. Only club members can make recommendations
Member
Posts: 26
Joined: Fri Nov 03, 2017 9:36 pm
Location: Oldham UK

Anyone help with small bit of welding?

Postby Trebor160 » Thu Oct 22, 2020 1:10 pm

Hi All - Well on now with the G5 rebuild and I was about to put on my newly re-sprayed tank and I noticed a small crack in the slot bracket underneath. As I dont have the welding kit or the skills is there anyone our there in the Manchester / NorthWest area who can help me out with a very small welding job? Cheers

Member
User avatar
Posts: 2401
Joined: Mon Jan 01, 1990 12:00 am
Location: LANCASHIRE UK

Re: Anyone help with small bit of welding?

Postby dave16mct » Thu Oct 22, 2020 2:34 pm

As you have refinished the tank, would it be a better idea to araldite a reinforcing plate in place? There are plenty of good welders, DBT Engineering in Preston are superb (but very, very busy). I've heard good reports about Bells Welding in Liverpool but I haven't used them. There surely must be someone nearer to you who would do it.
Dave.

Member
User avatar
Posts: 1319
Joined: Mon May 01, 2017 6:32 pm
Location: Lancashire

Re: Anyone help with small bit of welding?

Postby spookefoote1956 » Thu Oct 22, 2020 2:59 pm

Rub down to bare metal and apply a patch with Pegatanke Epoxy (canine's sphericals). I would also line the inside of the tank with Slosh, preferably grey as a belt and braces exercise.
हरे कृष्ण हरे कृष्ण
Hail Joe Lucas ............ Prince of Darkness!
All my bikes are original........ to me!

Return to Recommendations

Who is online

Users browsing this forum: No registered users and 1 guest