Dynamos and Magnetos
- rex.webb
- Member
- Posts: 2947
- Joined: Mon Jan 01, 1990 12:00 am
- Location: CAMBRIDGESHIRE UK
Dynamos and Magnetos
I have used the services of
E.L, Salmons
35 Mill Road
Burnham-on Crouch
Essex.
I have foud an invoice dated 21-7-89 for the rebuilding of my 1924 AJS Magneto,they have also rebuilt my 1937 AJS Magneto and at least 10 other Dynamoes and Magnetoes for friends.
E.L, Salmons
35 Mill Road
Burnham-on Crouch
Essex.
I have foud an invoice dated 21-7-89 for the rebuilding of my 1924 AJS Magneto,they have also rebuilt my 1937 AJS Magneto and at least 10 other Dynamoes and Magnetoes for friends.
r w webb
-
- Member
- Posts: 2157
- Joined: Thu Jul 04, 2002 1:00 am
- Location: NORMANDIE FRANCE
Dynamos and Magnetos
Had a comp mag done by SRM, the Beesa people. Very good but not cheap. Have another with Dave Lindsley as I speak. Exchange armatures I get from SRM too as they do an immediate swap if your old one's OK, then Independent Ignition Supplies for the small bits, bearings etc. For dynamos, same plus Hawker, Feked, Britbits, etc depending who's got what on a given day.
- Eamonn
- Webmaster
- Posts: 2250
- Joined: Sun Jan 01, 1995 12:00 am
- Location: OXFORDSHIRE UK
- Contact:
Dynamos and Magnetos
Weblinks :
S.R.M. - based in Ceredigion, Wales
Independent Ignition Supplies - Bideford, N.Devon
Sean Hawker - Bristol, Avon
S.R.M. - based in Ceredigion, Wales
Independent Ignition Supplies - Bideford, N.Devon
Sean Hawker - Bristol, Avon
Corners like a Lego man
-
- Member
- Posts: 3549
- Joined: Sun Jan 01, 1995 12:00 am
- Location: ESSEX UK
Dynamos and Magnetos
I have used Paul Many times with gerat service and help.
Dynamos. 8 Perthy Grove Trentham Stoke-on-Trent ST4 8PE. Tel: 01782 856839. Sales and Repairs. Contact: Paul Dunn ...
Dynamos. 8 Perthy Grove Trentham Stoke-on-Trent ST4 8PE. Tel: 01782 856839. Sales and Repairs. Contact: Paul Dunn ...
Roy
-
- Member
- Posts: 437
- Joined: Fri Jan 03, 2003 12:00 am
- Location: POWYS UK
Dynamos and Magnetos
also APL Magnetos (advertise OBM) does dymanos as well
-
- Posts: 50
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: UK
Dynamos and Magnetos
petert120r have you actually used APL Magnetos yourself for dynamos with good results?
-
- Member
- Posts: 437
- Joined: Fri Jan 03, 2003 12:00 am
- Location: POWYS UK
Dynamos and Magnetos
Yes, a couple of times.
- GOLDSTAR
- Member
- Posts: 2521
- Joined: Thu Sep 11, 2003 1:00 am
- Location: KENT UK
Dynamos and Magnetos
Phoned Dave Lindsley yesterday morning at 09.30 requesting an amature, brushes and a bearing for my dynamo, he stated he had just moved premises and couldn't post it until Wednesday next, asked me when I needed it replied 'yesterday',said he'd do what he could, goods turned up this morning 24 hours! That's good service in anyones book, thanks Dave,
kind regards
kind regards
-
- Posts: 36
- Joined: Mon May 14, 2007 10:26 pm
- Location: ISLE OF MAN UK
Dynamos and Magnetos
I can recommend Paul Dunn -sent him a very battered E3L for overhaul; telephone call from Paul on the day it arrived; dynamo overhauled and sent back within 10 days; looks and works as new and at cheaper than his original quote!
- Tommy RE
- Member
- Posts: 623
- Joined: Thu Mar 04, 2010 3:02 pm
- Location: WEST MIDLANDS UK
Dynamos and Magnetos
Just bought a rebuilt E3N Dynamo for my 1940 G3 (originally fitted with an E3AR, but these are as rare as rocking horse pooh) from Paul Dunn absolutely excellent workmanship dyno now charges like a goodun cost me £160.00 which was a damned sight less than my abortive bid for an E3AR in need of a lot of TLC from over the pond. Can't recommend him highly enough