Dynamos and Magnetos

Put your recommendations for services in this area. No negative or defammatory comments allowed. Only club members can make recommendations
User avatar
rex.webb
Member
Posts: 2947
Joined: Mon Jan 01, 1990 12:00 am
Location: CAMBRIDGESHIRE UK

Dynamos and Magnetos

Post by rex.webb »

I have used the services of
E.L, Salmons
35 Mill Road
Burnham-on Crouch
Essex.
I have foud an invoice dated 21-7-89 for the rebuilding of my 1924 AJS Magneto,they have also rebuilt my 1937 AJS Magneto and at least 10 other Dynamoes and Magnetoes for friends.
r w webb
Groily
Member
Posts: 2151
Joined: Thu Jul 04, 2002 1:00 am
Location: NORMANDIE FRANCE

Dynamos and Magnetos

Post by Groily »

Had a comp mag done by SRM, the Beesa people. Very good but not cheap. Have another with Dave Lindsley as I speak. Exchange armatures I get from SRM too as they do an immediate swap if your old one's OK, then Independent Ignition Supplies for the small bits, bearings etc. For dynamos, same plus Hawker, Feked, Britbits, etc depending who's got what on a given day.
User avatar
Eamonn
Webmaster
Posts: 2244
Joined: Sun Jan 01, 1995 12:00 am
Location: OXFORDSHIRE UK
Contact:

Dynamos and Magnetos

Post by Eamonn »

Weblinks :
S.R.M. - based in Ceredigion, Wales

Independent Ignition Supplies - Bideford, N.Devon

Sean Hawker - Bristol, Avon

Corners like a Lego man
G15 Roy
Member
Posts: 3546
Joined: Sun Jan 01, 1995 12:00 am
Location: ESSEX UK

Dynamos and Magnetos

Post by G15 Roy »

I have used Paul Many times with gerat service and help.

Dynamos. 8 Perthy Grove Trentham Stoke-on-Trent ST4 8PE. Tel: 01782 856839. Sales and Repairs. Contact: Paul Dunn ...
Roy
petert120r
Member
Posts: 437
Joined: Fri Jan 03, 2003 12:00 am
Location: POWYS UK

Dynamos and Magnetos

Post by petert120r »

also APL Magnetos (advertise OBM) does dymanos as well
A Moderator
Posts: 50
Joined: Wed Oct 12, 2005 10:45 pm
Location: UK

Dynamos and Magnetos

Post by A Moderator »

petert120r have you actually used APL Magnetos yourself for dynamos with good results?
petert120r
Member
Posts: 437
Joined: Fri Jan 03, 2003 12:00 am
Location: POWYS UK

Dynamos and Magnetos

Post by petert120r »

Yes, a couple of times.
User avatar
GOLDSTAR
Member
Posts: 2521
Joined: Thu Sep 11, 2003 1:00 am
Location: KENT UK

Dynamos and Magnetos

Post by GOLDSTAR »

Phoned Dave Lindsley yesterday morning at 09.30 requesting an amature, brushes and a bearing for my dynamo, he stated he had just moved premises and couldn't post it until Wednesday next, asked me when I needed it replied 'yesterday',said he'd do what he could, goods turned up this morning 24 hours! That's good service in anyones book, thanks Dave,
kind regards
Phil Diment
Posts: 36
Joined: Mon May 14, 2007 10:26 pm
Location: ISLE OF MAN UK

Dynamos and Magnetos

Post by Phil Diment »

I can recommend Paul Dunn -sent him a very battered E3L for overhaul; telephone call from Paul on the day it arrived; dynamo overhauled and sent back within 10 days; looks and works as new and at cheaper than his original quote!
User avatar
Tommy RE
Member
Posts: 623
Joined: Thu Mar 04, 2010 3:02 pm
Location: WEST MIDLANDS UK

Dynamos and Magnetos

Post by Tommy RE »

Just bought a rebuilt E3N Dynamo for my 1940 G3 (originally fitted with an E3AR, but these are as rare as rocking horse pooh) from Paul Dunn absolutely excellent workmanship dyno now charges like a goodun cost me £160.00 which was a damned sight less than my abortive bid for an E3AR in need of a lot of TLC from over the pond. Can't recommend him highly enough
Post Reply