Clutch pushrod adjuster.

General purpose topics/chat goes in here
Locked
laxy
Member
Posts: 790
Joined: Sat Jan 01, 1994 12:00 am
Location: LINCOLNSHIRE UK

Clutch pushrod adjuster.

Post by laxy »

Has anyone got a clutch pushrod adjuster 25-7-3 as fitted to pressure plate on B52 clutch. I would like to know how long it is and weather a ball bearing is fitted between pushrod and adjuster. The manual seems to contradict itself by listing a ball bearing but the drawing of the assembled clutch clearly shows no ball bearing at either end of the rod.
SPRIDDLER
Member
Posts: 8542
Joined: Wed Sep 01, 2004 1:00 am
Location: WEST SUSSEX UK

Re: Clutch pushrod adjuster.

Post by SPRIDDLER »

There's only one: 17-3-2, at the offside (kickstart) end of the rod. Note the two clutch thrust rod lengths.
See Spares List...........
B52 Clutch rod and ball Pt. Nos. (640x234).jpg
B52 Clutch rod and ball (455x264).jpg
The ball is shown in all the drawings available in Christians Archive... http://archives.jampot.dk/technical/Tra ... on/Burman/
B52 ball position.JPG
You do not have the required permissions to view the files attached to this post.
'There is a tide in the affairs of men
Which taken at the flood............'
laxy
Member
Posts: 790
Joined: Sat Jan 01, 1994 12:00 am
Location: LINCOLNSHIRE UK

Re: Clutch pushrod adjuster.

Post by laxy »

thank you very much for that spridler all is clear now
Locked