So i am beginning the rebuild of my engine.
The bore is slightly worn... piston is also undersize... 7 thou clearance at skirt bottom. Not the end of the world... but with crank apart now is the time to get a new gudgeon pin correctly fitted in the rod end.
The club spares show no 86mm pistons.... JP doñt seem to list a CS piston. Early short stroke engine has low top piston.
Ideas?
Sourcing G80CS '56-'59 oversize piston?
-
- Posts: 75
- Joined: Mon Jul 09, 2018 10:24 pm
- Location: New Zealand
-
- Member
- Posts: 850
- Joined: Thu Jan 01, 1998 12:00 am
- Location: ESSEX UK
Re: Sourcing G80CS '56-'59 oversize piston?
Try John Harding johnharding197@live.co.uk
He may have New old stock Hepolite, but you must state oversize required.
He may have New old stock Hepolite, but you must state oversize required.