Carb Banjo
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Carb Banjo
I'm looking for a banjo for my 389 Monobloc that points the fuel line downwards. There seems to be quite a few G5's fitted with them when looking on the net.
Any ideas of a part number or the whereabouts of one?
Cheers
Any ideas of a part number or the whereabouts of one?
Cheers
You do not have the required permissions to view the files attached to this post.
-
- Deceased
- Posts: 598
- Joined: Sun Oct 07, 2018 11:36 pm
- Location: Essex UK
Re: Carb Banjo
Have you looked up the Amal website? It's pretty comprehensive. Or try FD Classics at Dunmow, they're helpful.
Andy
Andy
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Carb Banjo
Non banjos pointing down listed, for 376 or 389. Only my 1966 250 CSR has banjo pointing downPlugsnpoints wrote:Have you looked up the Amal website? It's pretty comprehensive. Or try FD Classics at Dunmow, they're helpful.
Andy
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Re: Carb Banjo
I contacted Surrey Cycles and was told that Amal don't make them.
When I got my ass into gear and made up an order from them they had a used one that was damaged that I could have. So as long as I can straighten it out then all is good but it's funny that a part number can't be found
When I got my ass into gear and made up an order from them they had a used one that was damaged that I could have. So as long as I can straighten it out then all is good but it's funny that a part number can't be found
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Carb Banjo
Maybe the design was not good and too many were breaking, so is why Amal no longer make them.
-
- Member
- Posts: 1439
- Joined: Sat Oct 09, 2010 9:17 pm
- Location: ABERTAWE UK
Re: Carb Banjo
376/127 I think, Burtons have them listed on their price list it may not mean it's in stock
376/110 CARB INTAKE SLEEVE use 70-4576 £0.00
376/127 BANJO £3.50
376/130 BANJO SINGLE - 5/16" TUBE £0.00
https://burtonbikebits.net/Amal.pdf
376/110 CARB INTAKE SLEEVE use 70-4576 £0.00
376/127 BANJO £3.50
376/130 BANJO SINGLE - 5/16" TUBE £0.00
https://burtonbikebits.net/Amal.pdf
only dead fish go with the flow
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Re: Carb Banjo
I searched the Burton Bike part numbers and found a picture of a banjo as described - a 376/127.
http://www.klempfsbritishparts.com/BANJO--SINGLE-0
Thanks
http://www.klempfsbritishparts.com/BANJO--SINGLE-0
Thanks
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Re: Carb Banjo
Martin, I have one here if you want it?
shifter.
shifter.
You do not have the required permissions to view the files attached to this post.
?
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Re: Carb Banjo
Sent you a PM - Thanks Shifter
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH