Hi, Upon stripping engine the inlet/exhaust valve tops + their rocker arm tips were well worn, lack of oil seems
the likely cause. I believe this years model was fitted with jets to out board pushrods/rockers, which appear
to deliver copious amount of oil! no problems there.
Have fitted new rocker bushes + sleeves and felts, but worried the same will happen again as its easy for
oil to dump ( discharge ) to pushrod side.
Your thoughts / advice welcome
- New Users
- Board index Public Forums General Topics
-
- It is currently Fri Mar 29, 2024 8:56 am
- All times are UTC
1956 G3 LS Oil or lack off
General purpose topics/chat goes in here
-
- Member
- Posts: 1
- Joined: Sat Apr 18, 2020 10:47 pm
- Location: Surrey UK
Jump to
- Public Forums
- ↳ General Topics
- ↳ Modern AJS
- ↳ Help
- ↳ Frequent Questions
- ↳ Recommendations
- ↳ Where are they now?
- ↳ News Items
- Help
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18
- ↳ G80 Harris
- ↳ G9 / AJS Model 20
- ↳ G11 / AJS Model 30
- ↳ G12 / AJS Model 31
- ↳ G15 / AJS Model 33
- ↳ Competition / Racers
- ↳ Prewar
- ↳ Two Strokes
- ↳ Pre-War
- ↳ Post-War Classic
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18 / Harris
- ↳ G9 / Model 20
- ↳ G11 / Model 30
- ↳ G12 / Model 31
- ↳ G15 / Model 33
- ↳ Modern AJS
- Sections
- ↳ Bristol
- ↳ Cheshire and North Wales
- ↳ Chiltern
- ↳ East Berkshire
- ↳ East London and Essex
- ↳ East Midlands
- ↳ East Suffolk
- ↳ East Yorkshire
- ↳ Fenrunners
- ↳ Hampshire
- ↳ Heart of England
- ↳ Kent
- ↳ North East
- ↳ Notts and Derby
- ↳ Oxford
- ↳ Poachers
- ↳ Surrey
- ↳ Sussex
- ↳ Wey Valley
- ↳ Worcester
- ↳ France