Rear brake switch bracket

General purpose topics/chat goes in here
Member
Posts: 115
Joined: Wed May 08, 2019 6:41 pm
Location: UK

Rear brake switch bracket

Postby electrajohnt » Sat Jan 09, 2021 10:23 am

Is the correct position of the rear brake light switch bracket outside the fork leg or should it be the inside of the fork leg. It all seems a bit congested here. Also when I tighten the spindle nut withe bracket on the outside the bracket turns with the nut, I can only hold it in position with less force than I would expect to apply to the spindle nut, which means the nut is probably nut tight enough.
JohnT
JohnT

Member
Posts: 240
Joined: Wed Oct 12, 2005 9:45 pm
Location: MIDDLESEX UK

Re: Rear brake switch bracket

Postby John Jarrett » Sat Jan 09, 2021 10:33 am

Do you have the spacer on the outside of the swingarm that has a recessed area for the bracket to fit over and clamp tight when the nut/washer is tightened?

Member
Posts: 2503
Joined: Mon Mar 24, 2014 5:44 pm
Location: Aberdeenshire

Re: Rear brake switch bracket

Postby Mick D » Sat Jan 09, 2021 11:47 am

Hi

On my 60 G3 the bracket is on the outside of the swinging arm fork followed by the spacer where the chain adjuster bears, washer and then the nut.

Regards Mick

Return to General Topics

Who is online

Users browsing this forum: rippin and 24 guests