Rear brake switch bracket

[electrajohnt]

Is the correct position of the rear brake light switch bracket outside the fork leg or should it be the inside of the fork leg. It all seems a bit congested here. Also when I tighten the spindle nut withe bracket on the outside the bracket turns with the nut, I can only hold it in position with less force than I would expect to apply to the spindle nut, which means the nut is probably nut tight enough.
JohnT

[John Jarrett Profile]

Do you have the spacer on the outside of the swingarm that has a recessed area for the bracket to fit over and clamp tight when the nut/washer is tightened?

[Mick D Profile]

Hi

On my 60 G3 the bracket is on the outside of the swinging arm fork followed by the spacer where the chain adjuster bears, washer and then the nut.

Regards Mick