Motorcycle Turntable
- spookefoote1956
- Member
- Posts: 1838
- Joined: Mon May 01, 2017 7:32 pm
- Location: Wales Innit
Re: Motorcycle Turntable
Rob & Clive, both excellent ideas.
Hail Joe Lucas ............ Prince of Darkness!
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
- spookefoote1956
- Member
- Posts: 1838
- Joined: Mon May 01, 2017 7:32 pm
- Location: Wales Innit
Re: Motorcycle Turntable
You could be onto something here Clive.
You do not have the required permissions to view the files attached to this post.
Hail Joe Lucas ............ Prince of Darkness!
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
- spookefoote1956
- Member
- Posts: 1838
- Joined: Mon May 01, 2017 7:32 pm
- Location: Wales Innit
Re: Motorcycle Turntable
This variant uses the same lazy susan bearing. The advantage is you can use it with bikes with only side stands. Being a carpenter by trade I reckon I can alter the timber specs so I will report back on this.
https://www.youtube.com/watch?v=hirpvxFhUWk
https://www.youtube.com/watch?v=hirpvxFhUWk
You do not have the required permissions to view the files attached to this post.
Hail Joe Lucas ............ Prince of Darkness!
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
-
- Posts: 2884
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Motorcycle Turntable
Hi
I just can't see this as anything but a 'solution' looking for a problem. If you have the space to rotate a bike you have plenty of room to back it in / out.
The wooden platform is already bending under the weight of the bike, it won't be long before both ends are on the ground, then you'll have the added hinderence of manoeuvring the bike over / around gash bits of wood on the floor
Regards Mick
I just can't see this as anything but a 'solution' looking for a problem. If you have the space to rotate a bike you have plenty of room to back it in / out.
The wooden platform is already bending under the weight of the bike, it won't be long before both ends are on the ground, then you'll have the added hinderence of manoeuvring the bike over / around gash bits of wood on the floor
Regards Mick
- Expat
- Member
- Posts: 1034
- Joined: Thu Nov 12, 2015 2:22 pm
- Location: Tennessee, USA
Re: Motorcycle Turntable
Not in lockdown but currently on sick leave and confined indoors for three week with a nasty virus, not covid.
With reference to Mick's post, ex F1 car titanium skid plates could be fitted under each end. Then experiment to see how fast you have to spin it to create those lovely white sparks.
(Confinement seems to be having an effect on brain cell function. Sorry)
Stay safe All,
Steve
With reference to Mick's post, ex F1 car titanium skid plates could be fitted under each end. Then experiment to see how fast you have to spin it to create those lovely white sparks.
(Confinement seems to be having an effect on brain cell function. Sorry)
Stay safe All,
Steve
Keep shiny side up.
These are my principles, if you don’t like them, I have others. (Groucho Marx)
These are my principles, if you don’t like them, I have others. (Groucho Marx)