Can anyone help with the correct assembly order for the spring & flap in the breather assy? The diagram in the service book is not very clear.
Thanks everyone.
AJS TWIN CRANKCASE BREATHER
-
- Posts: 3
- Joined: Wed Mar 31, 2021 5:41 am
- Location: Hervey Bay Qld Australia
- clive
- Member
- Posts: 5663
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
-
- Posts: 3
- Joined: Wed Mar 31, 2021 5:41 am
- Location: Hervey Bay Qld Australia
Re: AJS TWIN CRANKCASE BREATHER
its a 1955 Model Clive
Cheers
Cheers
- clive
- Member
- Posts: 5663
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: AJS TWIN CRANKCASE BREATHER
Personally I cannot help but logically the spring has to be overcome to allow pressure out of the crankcase on a firing stroke, someone will know.
clive
if it ain't broke don't fix
if it ain't broke don't fix
-
- Member
- Posts: 2155
- Joined: Thu Jul 04, 2002 1:00 am
- Location: NORMANDIE FRANCE
Re: AJS TWIN CRANKCASE BREATHER
Big hollow bolt into crank
Disc
Spring
Nut with hole through it into female thread on big bolt
The disc has to vent crankcase pressure, so has to open against the spring as the pistons come down, as Clive says.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3
- Joined: Wed Mar 31, 2021 5:41 am
- Location: Hervey Bay Qld Australia
Re: AJS TWIN CRANKCASE BREATHER
Thanks Groily for the pics & everyone else for their input.
Cheers & stay safe
Pete
Cheers & stay safe
Pete