H/wt swing arm pivot.
-
- Member
- Posts: 2882
- Joined: Mon Jan 01, 1990 12:00 am
- Location: USA USA
H/wt swing arm pivot.
Mr. D. Madden also replaces the felt rings with o-rings whenever the arm is removed & the screw with a grease fitting.
On all hidden grease fittings & replace permanantly with metric type from the hardware, (ironmongers) to be able to use modern grease guns. You can match the original threads with a metric that fits nicely.
Cheers, Don.
On all hidden grease fittings & replace permanantly with metric type from the hardware, (ironmongers) to be able to use modern grease guns. You can match the original threads with a metric that fits nicely.
Cheers, Don.
-
- Posts: 2453
- Joined: Mon Jan 01, 2001 12:00 am
- Location: NORTHAMPTONSHIRE UK
H/wt swing arm pivot.
Ahh, I remember the days when we had ironmongers. Sadly they all went and now if you ask for anything at B&Q etc you are met with a 'if its not on the shelves..........
- griffin
- Member
- Posts: 207
- Joined: Thu Jan 01, 1998 12:00 am
- Location: NOTTINGHAMSHIRE UK
H/wt swing arm pivot.
How about this mod
http://atlanticgreen.com/needlesa.htm
Yes I know its a Norton.
I googled zerk fitting , its a grease nipple Edited by - griffin on 10 Dec 2007 11:38:52 PM
http://atlanticgreen.com/needlesa.htm
Yes I know its a Norton.
I googled zerk fitting , its a grease nipple Edited by - griffin on 10 Dec 2007 11:38:52 PM
- Biscuit
- Deceased
- Posts: 3924
- Joined: Thu Jan 01, 1998 12:00 am
- Location: KENT UK
H/wt swing arm pivot.
One good point of the Vincent is that they have a similar arrangement, but using taper rollers, which could be adjusted, allbeit with shims. The bearings were identical to the wheel bearings.
- thomthom
- Posts: 243
- Joined: Fri Dec 05, 2003 12:00 am
- Location: CHARD UK
H/wt swing arm pivot.
Slightly off the marque but on my Hinckley 900 Sprint there is no means of greasing the swing arm. It is necessary to dismantle the rear suspension and to pack grease into the bearings
- crawsue
- Posts: 1180
- Joined: Tue Apr 19, 2005 1:00 am
- Location: GLASGOW UK
H/wt swing arm pivot.
You've got me thinking ,now,Anthony (never a good sign)I must have a look at how it's done on my Hinkley 1050st.I assumed that like modern cars,then modern 'bikes had sealed bearings.
Hard work never killed anyone.....but why take the risk?
- GSAX1
- Member
- Posts: 971
- Joined: Wed Sep 14, 2005 1:00 am
- Location: NORWAY
H/wt swing arm pivot.
Modern bikes have sealed everything
-
- Member
- Posts: 2882
- Joined: Mon Jan 01, 1990 12:00 am
- Location: USA USA
H/wt swing arm pivot.
If you keep one long enough a modern will leak. Of course by then, it may not be modern. ]
Cheers, Don.
Cheers, Don.
- Peter Platt
- Posts: 84
- Joined: Mon Sep 30, 2013 9:43 pm
- Location: OXON UK
Re: H/wt swing arm pivot.
Out of interest, is the grease nipple mentioned in an earlier post the one shown below:
000051 L145A.GREASE NIPPLE
I want to make sure I order the correct one from the spares scheme!
Thanks.
000051 L145A.GREASE NIPPLE
I want to make sure I order the correct one from the spares scheme!
Thanks.
- 1957M30
- Posts: 156
- Joined: Wed Feb 01, 2017 11:19 pm
- Location: Hertfordshire
Re: H/wt swing arm pivot.
Neither the left nor right side on my 1957 M30 have provision for oiling the swing arm that I can see..!
Am I missing something or should I just drill and tap the RH side to provide oiling 💦â“
Am I missing something or should I just drill and tap the RH side to provide oiling 💦â“
You do not have the required permissions to view the files attached to this post.
Ride Safe & don'wear beige