I am in need of new exhaust for above.
Anyone know of a good/cheap(ha ha)
place
regards
G3ls
-
- Posts: 4
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: UK
- Eamonn
- Webmaster
- Posts: 2250
- Joined: Sun Jan 01, 1995 12:00 am
- Location: OXFORDSHIRE UK
- Contact:
-
- Posts: 4
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: UK
G3ls
Thanks Eammon
-
- Posts: 4
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: UK
G3ls
Thanks for reply Matthew.
Do you have a number for them??
Do you have a number for them??
- silverarrow
- Posts: 549
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LEICESTERSHIRE UK
G3ls
Armours number is 01942 888848 or Fax 01942 888878. I used them for a system for my 54 18S recently and i was pleased with the service and general value for money.
Les Smith
Les Smith
Keep smiling
-
- Posts: 15
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: UK
G3ls
anyone know where i can get a stainless steel exhaust system for a G3ls
- Eamonn
- Webmaster
- Posts: 2250
- Joined: Sun Jan 01, 1995 12:00 am
- Location: OXFORDSHIRE UK
- Contact:
G3ls
John,
Someone else recently enquired about exhausts - specifically having a custom built one. Many people get standard exhaust systems from Armours (their phone number is 01202 519409).
However I have copied the details below that I was given regarding custom exhausts.
==================================
Locally to me is a company called Renegade Products. Address is Unit 2, Clearways Industrial Estate, London Road West Kingsdown, Kent (almost
opposite the entrance to Brands Hatch)- tel 01732 852255 / 852999. They contacted me some years ago when they were based in Plumstead and at the time were building up business and offering a free exhaust pipe if you had a machine which needed a pattern made for it which they didn't have in stock but could then use as a master for others. Don't know whether they still offer the service but I know they do make one off specials but ideally
require the bike with the engine or you provide a pattern or drawing at your risk. I know of several people who have used them with great success.
Another company that could be tried are Mike the Pipe in Wallington Surrey phone 020 8669 1719 (fax 020 8773 4096). They have been established for
at least 40 years to my knowledge and make specials both for bikes and cars. Don't have E- mail addresses for either though I'm afraid but a call to
either I am sure would get a result.
===================================
Someone else recently enquired about exhausts - specifically having a custom built one. Many people get standard exhaust systems from Armours (their phone number is 01202 519409).
However I have copied the details below that I was given regarding custom exhausts.
==================================
Locally to me is a company called Renegade Products. Address is Unit 2, Clearways Industrial Estate, London Road West Kingsdown, Kent (almost
opposite the entrance to Brands Hatch)- tel 01732 852255 / 852999. They contacted me some years ago when they were based in Plumstead and at the time were building up business and offering a free exhaust pipe if you had a machine which needed a pattern made for it which they didn't have in stock but could then use as a master for others. Don't know whether they still offer the service but I know they do make one off specials but ideally
require the bike with the engine or you provide a pattern or drawing at your risk. I know of several people who have used them with great success.
Another company that could be tried are Mike the Pipe in Wallington Surrey phone 020 8669 1719 (fax 020 8773 4096). They have been established for
at least 40 years to my knowledge and make specials both for bikes and cars. Don't have E- mail addresses for either though I'm afraid but a call to
either I am sure would get a result.
===================================
Corners like a Lego man