250 G2 CSR

roly · Post by **roly** » Sun Feb 11, 2001 4:23 pm

REQUIRED CONNECTING ROD FOR 250 G2 CSR 1966

Peter Evans. · Post by **Peter Evans.** » Mon Feb 12, 2001 12:27 pm

all of the parts that you should need are available through the jampot spares cataloge (Poor Spelling) i have a G2 as well exceprt i have the CS model. happy riding.

GreenbottUK@hotmail.com

Brian Hebditch · Post by **Brian Hebditch** » Tue Feb 13, 2001 10:54 pm

If you are stuck try Alpha Bearings at Dudley. I have just had a new casting and big end rebuild for my 250 G2 1960 as the club unfortunately dont cover these parts. Alpha have produced big end rebuilds since the 1960's but are not cheap.

smokeyfiredog · Post by **smokeyfiredog** » Thu Feb 15, 2001 8:10 pm

Is it the con-rod you are after or the big end assembly as well?
If it is the con rod you want I think I can fix you up.

tel 01529 240348