1956 350 16 MS
Has anybody fitted a new timing side axle ?
The workshop manuals simply say press in with the oil holes lined up but as the position affects the valve timing it sounds a bit of an over simplification !
I would appreciate any tips.
I see in one workshop manual that there was a special tool to ensure accurate location but I don't suppose there are any of these tools in circulation nowadays ?
I would gladly buy one or hire one !
I am stuck to continue with rebuilding my flywheel until I can feel more sure about ending up with the timing pinion in the right position on its key to ensure accurate valve timing !
Fitting new timing side axle
-
- Posts: 6
- Joined: Mon Oct 12, 2015 11:49 pm
- Location: CHESHIRE UK
Fitting new timing side axle
E Hindley
-
- Posts: 6
- Joined: Mon Oct 12, 2015 11:49 pm
- Location: CHESHIRE UK
Re: Fitting new timing side axle
No that didn't work either - bit hard for this club apparently !
Problem sorted now anyway with non AJS help !
Problem sorted now anyway with non AJS help !
E Hindley
- Duncan
- Member
- Posts: 2118
- Joined: Thu Jul 10, 2003 1:00 am
- Location: HAMPSHIRE UK
Re: Fitting new timing side axle
Eric, are you willing to share this new found wisdom?
- ajscomboman
- Member
- Posts: 3963
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Fitting new timing side axle
Patience is a vitrue, something that judging by your replies you don't appear to have!Catman wrote:No that didn't work either - bit hard for this club apparently !
Problem sorted now anyway with non AJS help !