Tool box brackets for left and right side

Helpful information and requests for assitance and advice
Member
Posts: 121
Joined: Mon Nov 16, 2015 6:08 pm
Location: east sussex

Tool box brackets for left and right side

Postby willowbedone » Fri Dec 20, 2019 4:25 pm

Rebuilding a 1954 g80 Can anyone help with tool box mounting brackets Are they available from the spares dep
Or where can i look at a picture so i can fabricate them
Thanks ian

Member
User avatar
Posts: 1997
Joined: Mon Jan 01, 1990 12:00 am
Location: LANCASHIRE UK

Re: Tool box brackets for left and right side

Postby dave16mct » Fri Dec 20, 2019 4:59 pm

If its standard they bolt directly to the mudguard. Also there are 2 tabs on the frame tubes. If you're doing it 'comp' style you'll have to make 2 brackets shaped around the alloy guard to the bracket from the back of the oiltank. Good luck finding a picture of them, I've never found one!
Dave.

Member
User avatar
Posts: 1245
Joined: Sat Oct 09, 2010 8:17 pm
Location: SWANSEA UK

Re: Tool box brackets for left and right side

Postby cbranni » Fri Dec 20, 2019 5:52 pm

I fitted a nearside tool box to my comp model and Steven Surbey supplied the bracket (alloy mudguard to toolbox) part numbers..............021492 n/s and 016367 o/s.

Colin
only dead fish go with the flow

Member
Posts: 121
Joined: Mon Nov 16, 2015 6:08 pm
Location: east sussex

Re: Tool box brackets for left and right side

Postby willowbedone » Sat Dec 21, 2019 1:32 pm

Thanks for replies At least I now have to choices

Member
Posts: 477
Joined: Thu Mar 31, 2005 12:00 am
Location: BERKS UK

Re: Tool box brackets for left and right side

Postby Andy51 » Sat Dec 21, 2019 6:18 pm

Hi Ian, as Dave said, toolboxes fasten direct to mudguard and frame bracket in standard form. My '54 18S has alloy guards (it is a re-creation of my 1st ever 'proper' bike from over 40 years ago, a semi cafe racerised '54 G80S, done properly this time, as opposed to the G80's amateurish efforts by previous owners!) and I made what I think is a tidy alloy bracket linking both toolboxes to the mudguard and the bracket on the back of the oil tank. It has lasted over 10 years and many hard miles without fracturing. PM me and I will send a few pics of it in situ. Cheers, Andy

Return to Help

Who is online

Users browsing this forum: No registered users and 5 guests