I'm trying to remove the front disk on my JS125e. The bolt hex heads are being a pain. 8mm socket slides off and 7mm socket is too tight. Is there an imperial socket size midway which will give me that Goldilocks moment?
Cheers, Chris
Socket Size
- spookefoote1956
- Member
- Posts: 1836
- Joined: Mon May 01, 2017 7:32 pm
- Location: Wales Innit
Socket Size
Hail Joe Lucas ............ Prince of Darkness!
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
-
- Posts: 2886
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Socket Size
Hi Chris
9/32" AF is mid way but not a common size - are you using hex sockets as opposed to bi hex? they are more forgiving
Regards Mick
9/32" AF is mid way but not a common size - are you using hex sockets as opposed to bi hex? they are more forgiving
Regards Mick
-
- Member
- Posts: 1439
- Joined: Sat Oct 09, 2010 9:17 pm
- Location: ABERTAWE UK
- spookefoote1956
- Member
- Posts: 1836
- Joined: Mon May 01, 2017 7:32 pm
- Location: Wales Innit
Re: Socket Size
I am using hex sockets. Thanks chaps, I'll try and order a 3BA
Hail Joe Lucas ............ Prince of Darkness!
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein