hi All, Can anyone tell me the diameter and how many ball bearings per top and bottom on the steering head
Thanks Rod
56 / G11
- Rosy
- Posts: 173
- Joined: Sat Sep 14, 2019 5:50 pm
- Location: Bristol & East Devon
Re: 56 / G11
3/16" 28 each race.
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: 56 / G11
Your bikes parts list would have told you size 3/16" 56 per set.
-
- Member
- Posts: 151
- Joined: Sun Sep 19, 2010 10:17 am
- Location: AUCKLAND NEW ZEALAND
Re: 56 / G11
Great resource for these machines, http://archives.jampot.dk/ parts lists manuals and more.
- dave16mct
- Member
- Posts: 3242
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: 56 / G11
Yes, hard to find that info though as it's in the Frame section, not Forks as you would expect.
Dave.
Dave.
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: 56 / G11
Well steering head bearings are in the frame Dave. But as you say, people may look under forks.dave16mct wrote:Yes, hard to find that info though as it's in the Frame section, not Forks as you would expect.
Dave.
A short cut to finding a part which I do, is to look for it in the illustrations. All though many small parts may not be illustrated, you should see a larger part that the part you are looking for fits
into. There are fewer pages with illustrations, even fewer where you may expect to find a part you are looking for. For head bearings theres say two pages to look for them, frame or forks.
- ajscomboman
- Member
- Posts: 3969
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: 56 / G11
Err, I think you'll find they are already in the fork section as I moved them from frame as I thought it was an odd section to list them, but they are listed in factory manuals as frame.dave16mct wrote:Yes, hard to find that info though as it's in the Frame section, not Forks as you would expect.
Dave.
- dave16mct
- Member
- Posts: 3242
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: 56 / G11
Sorry Rob S. I was talking about the '56 factory Parts List.
Dave.
Dave.
- ajscomboman
- Member
- Posts: 3969
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: 56 / G11
We did originally have them as factory in the frame section but I thought it was very odd them being in there so moved them to the forks area. I suppose I could list them in both if it's easier.ajscomboman wrote:Err, I think you'll find they are already in the fork section as I moved them from frame as I thought it was an odd section to list them, but they are listed in factory manuals as frame.dave16mct wrote:Yes, hard to find that info though as it's in the Frame section, not Forks as you would expect.
Dave.