Just re-fitting my front wheel and looks to me like I'm either missing a spacer, or the adjusting ring is not screwed in enough. Can anyone help please?
Front wheel RHS - Missing spacer?
-
- Posts: 11
- Joined: Tue Aug 18, 2020 2:03 pm
- Location: Lincolnshire UK
Front wheel RHS - Missing spacer?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 2886
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Front wheel RHS - Missing spacer?
Hi
I think you need to confirm the bearings etc. are assembled correctly in the hub, I've just checked my G3 and the adjuster is only proud of the lock ring by about 1/16".
There's no spacer between the fork slider and adjuster.
Regards Mick
I think you need to confirm the bearings etc. are assembled correctly in the hub, I've just checked my G3 and the adjuster is only proud of the lock ring by about 1/16".
There's no spacer between the fork slider and adjuster.
Regards Mick
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Front wheel RHS - Missing spacer?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 11
- Joined: Tue Aug 18, 2020 2:03 pm
- Location: Lincolnshire UK
Re: Front wheel RHS - Missing spacer?
I didn't touch the bearings, but replaced just about everything else - so I'll take apart and have look. Thanks
-
- Posts: 11
- Joined: Tue Aug 18, 2020 2:03 pm
- Location: Lincolnshire UK
Re: Front wheel RHS - Missing spacer?
Looks like the bearing had moved a bit so needed a tap t'other way and the adjuster screws in a bit further now. I'll keep a close eye on it after a few miles.
Cheers.
Cheers.