Miller ign/headlight switch

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Posts: 3
Joined: Wed Oct 12, 2005 9:45 pm
Location: South Australia AUSTRALIA

Miller ign/headlight switch

Postby TUBBYINOZ » Sat Jun 03, 2006 8:07 am

I have a 39 G2 Matchless and am trying to find out if anybody makes or can supply the combination ignition / headlight switch assembly. Any leads to suppliers of repro units will help.

Posts: 7725
Joined: Tue Nov 22, 2005 6:01 pm
Location: UK

Miller ign/headlight switch

Postby itma » Sat Jun 03, 2006 9:30 am

rocking horse manure tubby.
mostly all robbed off by the pre war velo mob over here, If you have to ressort to mixing joe lucas with your miller bits it`ll at least be period mod.
Maybe an early LE velo bit will fit the bill, you`ll have to ask the site Totty about that.

User avatar
Posts: 1645
Joined: Wed Oct 12, 2005 9:45 pm
Location: SOUTH AUSTRALIA AUSTRALIA

Miller ign/headlight switch

Postby paul knapp » Sat Jun 03, 2006 3:01 pm

G'day Tub, have you tried Modak, over the border?.. Domi Racer in U.S. list a Miller.."lights only switch" repo. unit on there parts site.
Give Tony Codrington in Tanunda a call, he is in the phone book.He may be able to help!
Paul
___“As a hobby for the technically minded, motorcycling provides great scope.”

J.B.Nicholson

Don't worry about the world coming to an end today. It's already tomorrow in Australia!


_____________________________________________




Deceased
Posts: 407
Joined: Sat Nov 12, 2005 5:02 pm
Location: SURREY UK

Miller ign/headlight switch

Postby deshollier » Sat Jun 03, 2006 7:26 pm

Hi Rotund of Oz, Vehicle Wiring Products of Ilkeston, Derbyshire, UK list a Replica Miller headlight only switch. States that it is suitable for Vincent Velo, Rudge and some Royal Enfield models (does not mention Matchless) It sells for £38.85. Some one out there will no doubt confirm or otherwise its suitability. If you want to check it out the email address is sales@vehicleproducts.co.uk.


Edited by - deshollier on 03 Jun 2006 7:28:31 PM

Posts: 7725
Joined: Tue Nov 22, 2005 6:01 pm
Location: UK

Miller ign/headlight switch

Postby itma » Sat Jun 03, 2006 8:49 pm

but he needs an ignition facility for his coil ignition bike

Deceased
Posts: 407
Joined: Sat Nov 12, 2005 5:02 pm
Location: SURREY UK

Miller ign/headlight switch

Postby deshollier » Sun Jun 04, 2006 4:22 pm

He could fit a separate ignition switch, tucked out of sight if he is particular. That is what I would do, but then I am used to insults from the restore it to the day it left the factory fellowship!

Return to G2 / Model 14

Who is online

Users browsing this forum: No registered users and 3 guests