Bar end mirrors, any good?

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
User avatar
Posts: 3686
Joined: Mon Jan 01, 2001 12:00 am
Location: BLACKPOOL UK

Bar end mirrors, any good?

Postby Merlin » Tue Jun 20, 2006 4:10 pm

Older than Alan even Time Team have not found anything older,
Best Regards(as always)
Merlin
Chemists do it with test tubes

Deceased
User avatar
Posts: 3924
Joined: Thu Jan 01, 1998 12:00 am
Location: KENT UK

Bar end mirrors, any good?

Postby Biscuit » Tue Jun 20, 2006 5:11 pm

Hans (motoviajero) from Switzerland is older than me, probably all that fresh air he runs on.




User avatar
Posts: 3686
Joined: Mon Jan 01, 2001 12:00 am
Location: BLACKPOOL UK

Bar end mirrors, any good?

Postby Merlin » Tue Jun 20, 2006 8:59 pm

What can I say?
Chemists do it with test tubes

Member
Posts: 2438
Joined: Mon Jan 01, 2001 12:00 am
Location: NORTHAMPTONSHIRE UK

Bar end mirrors, any good?

Postby lawrence » Tue Jun 20, 2006 9:31 pm

You could grovel Stuart. It's what I usually do in this circumstance

Posts: 711
Joined: Thu Jun 08, 2006 8:14 pm
Location: OXON UK

Bar end mirrors, any good?

Postby good-hifi » Wed Jun 21, 2006 8:14 am

At the risk of being accused of changing the subject...

Thanks to the people that answered my questions, nobody has come forward with any negative comments about bar end mirros so that this the way I shall go.

Cheers.
Mick

Deceased
User avatar
Posts: 3924
Joined: Thu Jan 01, 1998 12:00 am
Location: KENT UK

Bar end mirrors, any good?

Postby Biscuit » Wed Jun 21, 2006 7:04 pm

Bar end mirrors are the bee's knees. Minor quibbles include having to move your head instead of just your eyes, if you try to adjust them on the move they eventually come loose - carry a spanner or Allen key and they tend to clash with car mirrors when filtering through stationary traffic. The factory fitted ones on my W650 are useless, on a straight road you have to move your arm to see to the rear, on easy left hand bends you have to move your whole body. Would advise only one bar end mirror.




User avatar
Posts: 3686
Joined: Mon Jan 01, 2001 12:00 am
Location: BLACKPOOL UK

Bar end mirrors, any good?

Postby Merlin » Wed Jun 21, 2006 9:07 pm

Hi Alan mine are great and I don't need to move? anything to see.
Chemists do it with test tubes

Deceased
User avatar
Posts: 3924
Joined: Thu Jan 01, 1998 12:00 am
Location: KENT UK

Bar end mirrors, any good?

Postby Biscuit » Wed Jun 21, 2006 10:24 pm

Your what are great Stuart? - bar end or stalky, if the latter you are either a skinny bugger or you have a hole in you shoulder. On the W650 the mirror extends level to the end of the grip, with my gear on my shoulders are as wide as the bars, add to this elbows out slightly in Eric Chitty fashion and one has to move to see behind.




Member
Posts: 2438
Joined: Mon Jan 01, 2001 12:00 am
Location: NORTHAMPTONSHIRE UK

Bar end mirrors, any good?

Postby lawrence » Wed Jun 21, 2006 11:48 pm

I had a problem seeing past my elbows on my ZZR600 and always cursed the mirrors as useless. Then my old Heine Gericke jacket wore out and as it had been so good I bought another. The updated version had 'soft' armour in the elbows instead of the earlier 'hard' armour. Suddenly I can see what is going on in my mirrors

And the bar end mirror? Fab and groovy and everything Alan says is correct (Depressing how he is always so right isn't it?)

Member
User avatar
Posts: 1602
Joined: Mon Jan 01, 1990 12:00 am
Location: DENMARK

Bar end mirrors, any good?

Postby TommoT » Thu Jun 22, 2006 12:09 pm

...nearly forgot, there is one drawback though. If you haven't got a centre stand, and your side stand is out of service and you need to get off the bike and leave it, you cannot lean the bike against a wall to the mirror side. You would then have to turn the bike 180 degrees in the horizontal plane to get a mirror free side next to the wall. IF you haven't fitted mirrors both sides, that is. THen you're really in trouble!....
TommoT

Ride Your Motorcycle As If Your Life Depended On It - Cos' It Does!

PreviousNext

Return to G2 / Model 14

Who is online

Users browsing this forum: No registered users and 4 guests