Swinging Arm Alignment

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Locked
Hedley Walker.
Posts: 7
Joined: Wed Oct 12, 2005 10:45 pm
Location: UK

Swinging Arm Alignment

Post by Hedley Walker. »

My G2CSR has a problem in that the two sides of the swinging arm are not in line, ie if you look from behind the RHS is higher than the left. There is no sign of damage to any component it just looks as if the cotter pin is not holding the two arms at the correct angle.

Is this a common problem, are the cotter pins reusable or has anyone any other ideas please?
Kieran Enright.
Posts: 16
Joined: Wed Oct 12, 2005 10:45 pm
Location: UK

Swinging Arm Alignment

Post by Kieran Enright. »

Dear Hedley,

could one of the cotter pins have sheared off? Or partly sheared through, so that it now has a step in it?

Best regards,

Kes Enright
Locked