Chain adjuster spanner size

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Locked
User avatar
Martin.S
Posts: 443
Joined: Sun Mar 18, 2018 12:02 pm
Location: Bristol UK

Chain adjuster spanner size

Post by Martin.S »

Hi, I'm making up some stainless rear chain adjusters - as I don't have any to measure could someone tell me the spanner size for them.
Cheers
cbranni
Member
Posts: 1439
Joined: Sat Oct 09, 2010 9:17 pm
Location: ABERTAWE UK

Re: Chain adjuster spanner size

Post by cbranni »

It would have been .340" A/F which is 1/8 whit but you could use 8 or 9 mm or even 3/8" hex and don't forget to use reduced A/F locking nuts.

Colin
only dead fish go with the flow
User avatar
Martin.S
Posts: 443
Joined: Sun Mar 18, 2018 12:02 pm
Location: Bristol UK

Re: Chain adjuster spanner size

Post by Martin.S »

Thanks Colin - much appreciated.
cbranni
Member
Posts: 1439
Joined: Sat Oct 09, 2010 9:17 pm
Location: ABERTAWE UK

Re: Chain adjuster spanner size

Post by cbranni »

A good source for stainless bar including Whit hex is Noggin End Metals.

Colin
only dead fish go with the flow
User avatar
Martin.S
Posts: 443
Joined: Sun Mar 18, 2018 12:02 pm
Location: Bristol UK

Re: Chain adjuster spanner size

Post by Martin.S »

And skips
User avatar
Peter Morris
Member
Posts: 733
Joined: Wed Mar 05, 2014 4:21 pm
Location: SURREY UK

Re: Chain adjuster spanner size

Post by Peter Morris »

Locked