hi all,
just purchased a(what I believe to be) 1961 G2. Engine No 61/G2 10529 and Frame No 15174.
just making lists of what I need for it - but I know I need a kickstart lever and off side footrest and the cover that goes over the gearbox adjusters for sure. Any suggestions please for these parts would be welcome.
going to convert to 12volts , so will have the various 6 volt parts for sale eventually if anyone needs them.
look forward to speaking(metaphorically) to lots of knowledgeable people on this forum. Thank you in advance.
Richard
G2 1961 new purchase
-
- Posts: 113
- Joined: Sun Jan 27, 2019 8:52 pm
- Location: Dorset
- clive
- Member
- Posts: 5664
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: G2 1961 new purchase
Hi Richard welcome to the forum and I hope you find what you are needing. Just a word about our forum rules. You are welcome to advertise for wanted parts or to make parts available to others but not in our general forum pages. Please use the adverts section free for full members £5 for others.
Regards Clive Adverts Editor
Regards Clive Adverts Editor
clive
if it ain't broke don't fix
if it ain't broke don't fix
- Ozmadman
- Posts: 2651
- Joined: Wed Dec 14, 2011 1:02 am
- Location: ESSEX UK
Re: G2 1961 new purchase
And just to add... you have limited access time on the forum as a guest so it would be advantageous to join the club as a full member. A digital membership (12 digital mags a year) plus full access to the forum is only £22 a year.
Paul
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Re: G2 1961 new purchase
Hello & welcome Richard as prior posts have said join the club, as the benefits of joining are truly beneficial in terms of the help and advice/spares/ and so on especially when starting a new project.
shifter
shifter
?
-
- Posts: 113
- Joined: Sun Jan 27, 2019 8:52 pm
- Location: Dorset
Re: G2 1961 new purchase
hi all,
thank you - I've now joined No 27883
so look forward to trawling and finding the bits needed
we'll be dating the machine etc so be in contact ref DVLA etc
Richard
thank you - I've now joined No 27883
so look forward to trawling and finding the bits needed
we'll be dating the machine etc so be in contact ref DVLA etc
Richard
-
- Member
- Posts: 8550
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: G2 1961 new purchase
Welcome Richard.Richard Hyatt wrote: just making lists of what I need for it - but I know I need a kickstart lever ...........
There was a recent thread on this forum ref the k/start which may be of interest, if you haven't already seen it. I understand that they not only differ model to model but are also very scarce. Have a look here:
http://www.jampot.com/forum/viewtopic.php?f=15&t=24245
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'