Model 14 fork yoke fitting advice

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Posts: 2
Joined: Wed Apr 03, 2019 10:35 am
Location: Warwickshire

Model 14 fork yoke fitting advice

Postby themadmarchhare » Wed Apr 03, 2019 10:45 am

Hi all,

I am currently trying to build a bike from box of bits. Frame headstock is bare tube and looks like I need frame races top and bottom (042610 and 042611) to suit teledraulic fork head races. Cannot find these anywhere. Has anyone found a source for these or a smart workaround using other bikes parts that are available?

Thanks

Posts: 2
Joined: Wed Apr 03, 2019 10:35 am
Location: Warwickshire

Re: Model 14 fork yoke fitting advice

Postby themadmarchhare » Thu Apr 18, 2019 10:24 am

Hi all,

New here and to non Japanese bikes so this is proving a lot more challenging than normal.
Looked at option of making frame races from scratch but decided in the end to modify a set of Enfield ones that are v.cheap.
No fitted it all together yet as forks need rebuilding but on paper it should work.

If anyone else finds same problem I am happy to share info.

Return to G2 / Model 14

Who is online

Users browsing this forum: No registered users and 7 guests