G2 centre stand assembly order

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Locked
Richard Hyatt
Posts: 113
Joined: Sun Jan 27, 2019 8:52 pm
Location: Dorset

G2 centre stand assembly order

Post by Richard Hyatt »

Hi all,
Can anyone help please with the correct assembly order of the centre stand.
I have the stand and stand bushes (about which it pivots) , the square shaft.
I need to work outwards on both sides with the correct bushes , distance pieces etc.
I have the footrests and nuts.
I just need to know the bits in between on both sides please?
Last edited by Richard Hyatt on Fri Apr 26, 2019 6:13 am, edited 1 time in total.
User avatar
Rob Harknett
Member
Posts: 11236
Joined: Mon Jan 01, 1990 12:00 am
Location: ESSEX UK

Re: G centre stand assembly order

Post by Rob Harknett »

All the parts are listed in the bikes parts list, but no dimensions or assembly illustrations.
You may get some clues from your workshop manual. http://archives.jampot.dk/book/Workshop ... models.pdf
See page 64 on the PDF counter where it tells you how to dismantle the centre stand. Just reverse this procedure to assembly it
Richard Hyatt
Posts: 113
Joined: Sun Jan 27, 2019 8:52 pm
Location: Dorset

Re: G centre stand assembly order

Post by Richard Hyatt »

Thank you for this.
I know there's not good diagrams for these G2s, so if anyone else has any dimensions of these components , that would be great.
User avatar
Martin.S
Posts: 443
Joined: Sun Mar 18, 2018 12:02 pm
Location: Bristol UK

Re: G2 centre stand assembly order

Post by Martin.S »

Here you go

http://www.jampot.com/forum/download/file.php?id=7375

Courtesy of David Baker(aus) via Simon Hoskins
alanengineer
Member
Posts: 1175
Joined: Wed Oct 12, 2005 10:45 pm
Location: KENT UK

Re: G2 centre stand assembly order

Post by alanengineer »

Brilliant, super, the important photo of all important photos for lightweights. But, please give it a findable title
User avatar
Rob Harknett
Member
Posts: 11236
Joined: Mon Jan 01, 1990 12:00 am
Location: ESSEX UK

Re: G2 centre stand assembly order

Post by Rob Harknett »

I will ask Dave If I/we can used the file for club tech tips. Which I could prepare and submit to Eamonn to upload.
Richard Hyatt
Posts: 113
Joined: Sun Jan 27, 2019 8:52 pm
Location: Dorset

Re: G2 centre stand assembly order

Post by Richard Hyatt »

Absolutely magic
Now I need to source or make the bits
Thank you
User avatar
Rob Harknett
Member
Posts: 11236
Joined: Mon Jan 01, 1990 12:00 am
Location: ESSEX UK

Re: G2 centre stand assembly order

Post by Rob Harknett »

Take measurements and rule with you to auto jumble. you make find material / parts, that could be cut to length. The club may even have the parts or may soon have them.
Locked