Hi Guys
How easy is it to change the swinging arm bushes on a matchless G2?
Does anyone have a step by step guide?
Gary
Swinging arm bushes
-
- Member
- Posts: 52
- Joined: Fri Sep 07, 2018 8:56 pm
- Location: United Kingdom
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Swinging arm bushes
http://archives.jampot.dk/book/Workshop ... .NEILL.pdf
Ses page 85 to 86 in this book. There's only a few words. Maybe you may change your mind about wanting to remove the bushes. Having read only the first couple of lines. Deciding the bushes may be OK.
Ses page 85 to 86 in this book. There's only a few words. Maybe you may change your mind about wanting to remove the bushes. Having read only the first couple of lines. Deciding the bushes may be OK.
-
- Member
- Posts: 746
- Joined: Thu Mar 31, 2005 1:00 am
- Location: BERKS UK
Re: Swinging arm bushes
I wrote an article for Jampot a few years ago on replacing h/wt swing arm bearings. PM me if you want a copy. Main difference as I understand it is l/wt swing arm is in 2 pieces held together with a cotter pin. Andy
-
- Member
- Posts: 52
- Joined: Fri Sep 07, 2018 8:56 pm
- Location: United Kingdom
Re: Swinging arm bushes
Thanks Rob / Andy for replying, will keep you posted when I decide to do this
Gary
PS Thanks for the copy of the book Rob, I already had a hard copy of this
Gary
PS Thanks for the copy of the book Rob, I already had a hard copy of this