Is anyone able to tell me where abouts the CSR fork shroud rubber washer fits (018216)?
Cheers
CSR Fork Shroud Rubber Washer
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Re: CSR Fork Shroud Rubber Washer
Found this in an earlier post from Rangey :-
But in the drawing below (off Ebay) it shows it as Rangey explained
But if you look in the picture below the rubber washer is under the bottom chrome cap - it could also possibly fit under the bottom yoke.Ok you need to be looking at an illustration that shows 1-1/8" forks. The bottom chrome housing ring 018215 ( X2) has the rubber ring inside it and the fork cover with the headlamp bracket (lug) sits into it so when you tighten the upper yolk down it holds the headlamp brackets ( lug) tight. The top cover is part no 010703 and is different to the bottom chrome ring 018215 so you need two. The headlamp bracket tube fits into this
But in the drawing below (off Ebay) it shows it as Rangey explained
You do not have the required permissions to view the files attached to this post.