I'm not sure if the top central side panel brackets are correct on my frame,
The left hand one looks correct - it has a threaded spacer welded to the bracket which appears to have a very sloppy 1/4" thread where as the right hand side has no spacer /nut but the bracket itself has what looks like a 5/16 thread tapped into it.
Any help here would be gratefully received.
Martin
Side Panel Brackets
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
- Samuel
- Member
- Posts: 1068
- Joined: Tue Sep 09, 2003 1:00 am
- Location: Somerset UK
Re: Side Panel Brackets
Hi,
A note of the Model and Year of your machine would assist and a photo would be even better ?
cheers
A note of the Model and Year of your machine would assist and a photo would be even better ?
cheers
Sam
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Re: Side Panel Brackets
I'm making this bike out of bits so the subframe could be from an AJS M14, CS, M8 or a Matchless G2, CS or G5. The CS's have a different part number but I don't know the differences. The side panels are not from the CS though.
Cheers
Cheers