piston ajs 250 csr
-
- Posts: 99
- Joined: Tue Apr 10, 2018 10:43 pm
- Location: Malta
Re: piston ajs 250 csr
Hi, Thanks for the info so for CSR250 Engine you can use normal G2 Head ?
- clanger9
- Posts: 1165
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: piston ajs 250 csr
Normal 250 head = 1 1/16" inlet bore = Amal 376 carb
CSR/350 head = 1 1/8" inlet bore = Amal 389 carb
If you just want to get it running and aren't too fussed about getting the specs exactly right then either head will work. However, it's important that the carburettor bore and inlet bore match exactly (otherwise it'll run terribly).
Maximum power will be slightly reduced (compared to a CSR) with the smaller bore head, but probably not in any noticeable way...
CSR/350 head = 1 1/8" inlet bore = Amal 389 carb
If you just want to get it running and aren't too fussed about getting the specs exactly right then either head will work. However, it's important that the carburettor bore and inlet bore match exactly (otherwise it'll run terribly).
Maximum power will be slightly reduced (compared to a CSR) with the smaller bore head, but probably not in any noticeable way...
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS