1965 G2csr
Please can you tell me if there are 5 bolts securing the cylinder head ? There are clearly 4 sleeve nuts set in a square and a 3/8" hole to one side. However the manual suggests there a 5 bolts in total but I am unable to find one in the box of bits- assuming there should be a bolt here what size is it- I guess its 3/8 26tpi (???) by 3"
Cylinder Head
-
- Posts: 64
- Joined: Wed Sep 18, 2019 11:42 am
- Location: Lincolnshire UK
-
- Member
- Posts: 1439
- Joined: Sat Oct 09, 2010 9:17 pm
- Location: ABERTAWE UK
Re: Cylinder Head
There is a bolt just inside the rocker box cover, near the oil way hole, if memory serves me right it's 5/16 BSF but the length evades me, maybe 2" long,
People with far more knowledge than me will be along to put you right soon.
Kind regards Colin
People with far more knowledge than me will be along to put you right soon.
Kind regards Colin
only dead fish go with the flow
-
- Posts: 64
- Joined: Wed Sep 18, 2019 11:42 am
- Location: Lincolnshire UK
Re: Cylinder Head
Thanks Colin- I'm asking about the Cylinder head to barrel joint....I've found a bolt in the box of bits which looks close but its clearly not the right one as the head is pitted and rusty
-
- Member
- Posts: 1439
- Joined: Sat Oct 09, 2010 9:17 pm
- Location: ABERTAWE UK
Re: Cylinder Head
If you look at your spares book it's part number 042196 Bolt cylinder head 5/16 x 22, it is also shown in the engine/gearbox exploded drawing.
I think this is the bolt you are looking for.
Colin
I think this is the bolt you are looking for.
Colin
only dead fish go with the flow
- clanger9
- Posts: 1165
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: Cylinder Head
That's the one! It's 5/16" x 3" BSF.
http://www.jampot.com/forum/viewtopic.p ... 10#p189892
http://www.jampot.com/forum/viewtopic.p ... 10#p189892
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
-
- Posts: 64
- Joined: Wed Sep 18, 2019 11:42 am
- Location: Lincolnshire UK
Re: Cylinder Head
Thats sorted it
Thanks guys.
Thanks guys.