Hello, I am looking for some help finding the correct crank pin or complete big end assembly for my 1962 model 14 engine number 11591.
I have purchased one which has smaller diameters where it fits into the fly wheels though the bearing are correct for the con rod. My original crank pin has diameters of 0.940''. I understand the crank pin was beefed up over the years. If somebody could give me a part number for the bigger crank pin/assembly i would be very grateful. The one i bought is part number 900605 from the parts service, is 900606 the correct size one?
Thank you.
Steve
- New Users
- Board index Help G2 / Model 14
-
- It is currently Fri Apr 19, 2024 6:00 pm
- All times are UTC+01:00
crank pin
Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
-
- Posts: 1
- Joined: Thu May 21, 2020 6:05 pm
- Location: Gloucester
crank pin
Post by fartersbarters »
Jump to
- Public Forums
- ↳ General Topics
- ↳ Modern AJS
- ↳ Help
- ↳ Frequent Questions
- ↳ Recommendations
- ↳ Where are they now?
- ↳ News Items
- Help
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18
- ↳ G80 Harris
- ↳ G9 / AJS Model 20
- ↳ G11 / AJS Model 30
- ↳ G12 / AJS Model 31
- ↳ G15 / AJS Model 33
- ↳ Competition / Racers
- ↳ Prewar
- ↳ Two Strokes
- ↳ Pre-War
- ↳ Post-War Classic
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18 / Harris
- ↳ G9 / Model 20
- ↳ G11 / Model 30
- ↳ G12 / Model 31
- ↳ G15 / Model 33
- ↳ Modern AJS
- Sections
- ↳ Bristol
- ↳ Cheshire and North Wales
- ↳ Chiltern
- ↳ East Berkshire
- ↳ East London and Essex
- ↳ East Midlands
- ↳ East Suffolk
- ↳ East Yorkshire
- ↳ Fenrunners
- ↳ Hampshire
- ↳ Heart of England
- ↳ Kent
- ↳ North East
- ↳ Notts and Derby
- ↳ Oxford
- ↳ Poachers
- ↳ Surrey
- ↳ Sussex
- ↳ Wey Valley
- ↳ Worcester
- ↳ France