1965 G2CSR Clutch play

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Member
User avatar
Posts: 1130
Joined: Sat Jun 20, 2015 8:38 am
Location: Chester, UK

Re: 1965 G2CSR Clutch play

Postby clanger9 » Fri Nov 13, 2020 8:32 pm

You are truly down the rabbit hole now... ;)
I found a couple more photos of clutch plates. This was as far as I got with my attempts to identify them all.

IMG_0248.jpg


IMG_0249.jpg


PS: yes, you'll need to resize photos to 640x480 or 800x600 to post them here.
You do not have the required permissions to view the files attached to this post.
1989 Moto Morini Dart 350
1993 Ducati 750SS

Member
Posts: 135
Joined: Thu Oct 22, 2020 7:07 pm
Location: Monmouthshire UK

Re: 1965 G2CSR Clutch play

Postby ColourNcoat » Sat Nov 14, 2020 5:46 am

clanger9 wrote:You are truly down the rabbit hole now... ;)
I found a couple more photos of clutch plates. This was as far as I got with my attempts to identify them all.

IMG_0248.jpg


IMG_0249.jpg


PS: yes, you'll need to resize photos to 640x480 or 800x600 to post them here.

You have really excelled in you pursuit in helping me. Thank you :beer:

It's a toss between basket 3 or 4 with the duplex chain.
I will take some measurements when I get into work this morning to clarify.

Looking back at your archive pictures. I have noticed the two duplex baskets have ( teeth ) at the bottom of the clutch centre. ( mine do not )
The internal shoulder of the baskets ( 3 and 4 ) are in good condition. My internal shoulder is like a brake disk. This tells me the plate is spinning in opposition and making contact with the basket.

I will double check when I get in this morning. :beer: :beer:

Member
Posts: 135
Joined: Thu Oct 22, 2020 7:07 pm
Location: Monmouthshire UK

Re: 1965 G2CSR Clutch play

Postby ColourNcoat » Sat Nov 14, 2020 7:32 am

The measurements are as follows...
Basket height from internal shoulder...1.0265" or 26.07mm.
Height/depth of clutch centre...1.589" or 40.36mm.
Cheers :beer:
Roger.
P.S. file still too large to upload :headbang:

Member
User avatar
Posts: 1130
Joined: Sat Jun 20, 2015 8:38 am
Location: Chester, UK

Re: 1965 G2CSR Clutch play

Postby clanger9 » Sat Nov 14, 2020 11:11 am

If you have a "no teeth" basket with a duplex sprocket, then I'm pretty certain that is the correct CSR part (043444).
It should have the 7-plate CSR clutch pack (3x 043191, 3x 043192, 1x 043193). All of these are available from club spares. :D

From your description, it sounds like someone has tried to fit a standard 250 pack to your bike - understandable, given that there's no factory documentation anywhere that explains the differences!
1989 Moto Morini Dart 350
1993 Ducati 750SS

Member
Posts: 135
Joined: Thu Oct 22, 2020 7:07 pm
Location: Monmouthshire UK

Re: 1965 G2CSR Clutch play

Postby ColourNcoat » Sat Nov 14, 2020 12:33 pm

clanger9 wrote:If you have a "no teeth" basket with a duplex sprocket, then I'm pretty certain that is the correct CSR part (043444).
It should have the 7-plate CSR clutch pack (3x 043191, 3x 043192, 1x 043193). All of these are available from club spares. :D

From your description, it sounds like someone has tried to fit a standard 250 pack to your bike - understandable, given that there's no factory documentation anywhere that explains the differences!

There's no surprises there then..... Almost a completely new bike by the time I am finished.
My Kawasaki didn't cost as much as this :rofl:
Thank you for,everything again. :beer:

Previous

Return to G2 / Model 14

Who is online

Users browsing this forum: No registered users and 9 guests