1965 G2CSR Clutch play
25 posts
• Page 3 of 3 • 1, 2, 3
Re: 1965 G2CSR Clutch play
by clanger9 » Fri Nov 13, 2020 8:32 pm
You are truly down the rabbit hole now... 
I found a couple more photos of clutch plates. This was as far as I got with my attempts to identify them all.
PS: yes, you'll need to resize photos to 640x480 or 800x600 to post them here.
I found a couple more photos of clutch plates. This was as far as I got with my attempts to identify them all.
PS: yes, you'll need to resize photos to 640x480 or 800x600 to post them here.
You do not have the required permissions to view the files attached to this post.
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
- ColourNcoat
- Member
- Posts: 134
- Joined: Thu Oct 22, 2020 7:07 pm
- Location: Monmouthshire UK
Re: 1965 G2CSR Clutch play
by ColourNcoat » Sat Nov 14, 2020 5:46 am
clanger9 wrote:You are truly down the rabbit hole now...
I found a couple more photos of clutch plates. This was as far as I got with my attempts to identify them all.
PS: yes, you'll need to resize photos to 640x480 or 800x600 to post them here.
You have really excelled in you pursuit in helping me. Thank you
It's a toss between basket 3 or 4 with the duplex chain.
I will take some measurements when I get into work this morning to clarify.
Looking back at your archive pictures. I have noticed the two duplex baskets have ( teeth ) at the bottom of the clutch centre. ( mine do not )
The internal shoulder of the baskets ( 3 and 4 ) are in good condition. My internal shoulder is like a brake disk. This tells me the plate is spinning in opposition and making contact with the basket.
I will double check when I get in this morning.
- ColourNcoat
- Member
- Posts: 134
- Joined: Thu Oct 22, 2020 7:07 pm
- Location: Monmouthshire UK
Re: 1965 G2CSR Clutch play
by ColourNcoat » Sat Nov 14, 2020 7:32 am
The measurements are as follows...
Basket height from internal shoulder...1.0265" or 26.07mm.
Height/depth of clutch centre...1.589" or 40.36mm.
Cheers
Roger.
P.S. file still too large to upload
Basket height from internal shoulder...1.0265" or 26.07mm.
Height/depth of clutch centre...1.589" or 40.36mm.
Cheers
Roger.
P.S. file still too large to upload
Re: 1965 G2CSR Clutch play
by clanger9 » Sat Nov 14, 2020 11:11 am
If you have a "no teeth" basket with a duplex sprocket, then I'm pretty certain that is the correct CSR part (043444).
It should have the 7-plate CSR clutch pack (3x 043191, 3x 043192, 1x 043193). All of these are available from club spares.
From your description, it sounds like someone has tried to fit a standard 250 pack to your bike - understandable, given that there's no factory documentation anywhere that explains the differences!
It should have the 7-plate CSR clutch pack (3x 043191, 3x 043192, 1x 043193). All of these are available from club spares.
From your description, it sounds like someone has tried to fit a standard 250 pack to your bike - understandable, given that there's no factory documentation anywhere that explains the differences!
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
- ColourNcoat
- Member
- Posts: 134
- Joined: Thu Oct 22, 2020 7:07 pm
- Location: Monmouthshire UK
Re: 1965 G2CSR Clutch play
by ColourNcoat » Sat Nov 14, 2020 12:33 pm
clanger9 wrote:If you have a "no teeth" basket with a duplex sprocket, then I'm pretty certain that is the correct CSR part (043444).
It should have the 7-plate CSR clutch pack (3x 043191, 3x 043192, 1x 043193). All of these are available from club spares.
From your description, it sounds like someone has tried to fit a standard 250 pack to your bike - understandable, given that there's no factory documentation anywhere that explains the differences!
There's no surprises there then..... Almost a completely new bike by the time I am finished.
My Kawasaki didn't cost as much as this
Thank you for,everything again.
25 posts
• Page 3 of 3 • 1, 2, 3
Who is online
Users browsing this forum: Google [Bot] and 5 guests