1965 late csr tail light arrangement

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Member
Posts: 135
Joined: Thu Oct 22, 2020 7:07 pm
Location: Monmouthshire UK

1965 late csr tail light arrangement

Postby ColourNcoat » Sat Nov 21, 2020 9:18 am

Hi All, once again on a quest to find tail light mounting diagram/drawing. I have the number plate and light but unable to see how it is mounted to the rear mudguards.
Any close-up or diagrams would be greatly appreciated.
Regards Roger

Member
Posts: 1053
Joined: Mon Jan 01, 1990 12:00 am
Location: WEST SUSSEX UK

Re: 1965 late csr tail light arrangement

Postby g80csp11 » Sat Nov 21, 2020 1:45 pm

tail light.jpg


Fixed like this !
You do not have the required permissions to view the files attached to this post.

Member
User avatar
Posts: 439
Joined: Sun Mar 18, 2018 12:02 pm
Location: Bristol UK

Re: 1965 late csr tail light arrangement

Postby Martin.S » Sat Nov 21, 2020 1:56 pm

There should be a bracket at the bottom of the number plate where there it would attach with two BA screws up to the fairing part of the unit there should be welded in from the left to the right a 5/8th or so bracket with a square hole for one of those little sprung caged square nuts. So a bolt up through the mudguard screws into this captured nut.
Hope I'm not stating the obvious

Member
Posts: 135
Joined: Thu Oct 22, 2020 7:07 pm
Location: Monmouthshire UK

Re: 1965 late csr tail light arrangement

Postby ColourNcoat » Sat Nov 21, 2020 7:25 pm

g80csp11 wrote:
tail light.jpg


Fixed like this !

I was told earlier that I couldn't list this question.
Thanks very much.
There doesn't seem to be anything on the tail light assembly.
Regards Roger :beer:

Member
Posts: 135
Joined: Thu Oct 22, 2020 7:07 pm
Location: Monmouthshire UK

Re: 1965 late csr tail light arrangement

Postby ColourNcoat » Sat Nov 21, 2020 7:32 pm

Martin.S wrote:There should be a bracket at the bottom of the number plate where there it would attach with two BA screws up to the fairing part of the unit there should be welded in from the left to the right a 5/8th or so bracket with a square hole for one of those little sprung caged square nuts. So a bolt up through the mudguard screws into this captured nut.
Hope I'm not stating the obvious

I have the number plate and a bracket which is bolted to the mudguard.
The shroud that sits over the wires and attaches to the light assembly is missing. Not sure what it's called.
Many thanks for assistance :beer:
Roger

Member
Posts: 1053
Joined: Mon Jan 01, 1990 12:00 am
Location: WEST SUSSEX UK

Re: 1965 late csr tail light arrangement

Postby g80csp11 » Sat Nov 21, 2020 8:50 pm

Mine is very similar to this

https://www.feked.com/number-plate-ajs- ... orton.html
https://www.feked.com/rear-lamp-lucas-679-type.html

although i don't use feked , show as example only

Member
Posts: 135
Joined: Thu Oct 22, 2020 7:07 pm
Location: Monmouthshire UK

Re: 1965 late csr tail light arrangement

Postby ColourNcoat » Sat Nov 21, 2020 9:29 pm

g80csp11 wrote:Mine is very similar to this

https://www.feked.com/number-plate-ajs- ... orton.html
https://www.feked.com/rear-lamp-lucas-679-type.html

although i don't use feked , show as example only

I now know what I need as the parts.
The problem is not knowing what I need and where to get them.
Thank you Peter.
Thank you all.
Roger :beer:

Return to G2 / Model 14

Who is online

Users browsing this forum: No registered users and 6 guests