Another suggestion that you don't have to follow.
Before you start cutting bits off the retaining nuts, try putting a number of washers on as spacers instead of the nut to see if the thickness of the nut is indeed what's holding the plate away from the swinging arm. I am assuming that neither of the two mating parts has been ground off in the past, making them too short to fit properly. Don't forget, a 3/8" thick nut like I've got is only 9.5mm.
If 'twere me, with plenty of time in the middle of a lockdown, I'd take the whole assembly apart and check that all the parts were in the correct order. Accidently mixing up the long spacer with the short one inside the hub could possible make a difference to where all the other bits sit on the spindle and therefore how it aligns when offered up to the swinging arm. If the wheel ends up too far to one side or the other, it could affect the running of the chain, too.
OK chaps, back to my bunker. See you next year.
- New Users
- Board index Help G2 / Model 14
-
- It is currently Fri Apr 19, 2024 12:19 pm
- All times are UTC+01:00
Rear wheel nuts and spacers
Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
- Janet
- Member
- Posts: 4147
- Joined: Mon Jan 01, 1996 12:00 am
- Location: EAST YORKSHIRE UK
Jump to
- Public Forums
- ↳ General Topics
- ↳ Modern AJS
- ↳ Help
- ↳ Frequent Questions
- ↳ Recommendations
- ↳ Where are they now?
- ↳ News Items
- Help
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18
- ↳ G80 Harris
- ↳ G9 / AJS Model 20
- ↳ G11 / AJS Model 30
- ↳ G12 / AJS Model 31
- ↳ G15 / AJS Model 33
- ↳ Competition / Racers
- ↳ Prewar
- ↳ Two Strokes
- ↳ Pre-War
- ↳ Post-War Classic
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18 / Harris
- ↳ G9 / Model 20
- ↳ G11 / Model 30
- ↳ G12 / Model 31
- ↳ G15 / Model 33
- ↳ Modern AJS
- Sections
- ↳ Bristol
- ↳ Cheshire and North Wales
- ↳ Chiltern
- ↳ East Berkshire
- ↳ East London and Essex
- ↳ East Midlands
- ↳ East Suffolk
- ↳ East Yorkshire
- ↳ Fenrunners
- ↳ Hampshire
- ↳ Heart of England
- ↳ Kent
- ↳ North East
- ↳ Notts and Derby
- ↳ Oxford
- ↳ Poachers
- ↳ Surrey
- ↳ Sussex
- ↳ Wey Valley
- ↳ Worcester
- ↳ France