G2 Kickstart shaft removal

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Posts: 16
Joined: Wed Oct 12, 2005 9:45 pm
Location: UK

G2 Kickstart shaft removal

Postby Rees » Sun May 27, 2007 1:18 am

Hi all, anyone know how to remove the kickstart shaft on a G2?. I have removed the main casing and gearbox casing,kickstart spring and clutch cable. The manual says to just pull it out [there does not appear to be a circlip holding it in]. Try as I might it will not budge, is there something I am missing?.
Cheers, Daveski.

Deceased
User avatar
Posts: 3924
Joined: Thu Jan 01, 1998 12:00 am
Location: KENT UK

G2 Kickstart shaft removal

Postby Biscuit » Sun May 27, 2007 11:16 pm

Some have a circlip some don't. I'm not clear about the position you are in with the box, but you cannot remove it from the outside, you have to remove the inner cover and push it through. That means removing the ratchet thingy and the mainshaft nut.




Return to G2 / Model 14

Who is online

Users browsing this forum: No registered users and 12 guests