There is a small oil leak coming from the kickstart shaft. Before I take off the end plate to renew the seal is there any other seals/parts I should renew whilst in there just to be on the safe side.There seems to be a little bit of `play` in the kickstart lever, meaning it takes about 1/2-3/4" before anything happens, is this normal?
Cheers, basketcase.
- New Users
- Board index Help G2 / Model 14
-
- It is currently Sat Apr 27, 2024 1:58 am
- All times are UTC+01:00
G2 CSR Gearbox
Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
-
- Posts: 141
- Joined: Sat Jan 15, 2005 12:00 am
- Location: STAFFORDSHIRE UK
G2 CSR Gearbox
Post by basketcase »
Jump to
- Public Forums
- ↳ General Topics
- ↳ Modern AJS
- ↳ Help
- ↳ Frequent Questions
- ↳ Recommendations
- ↳ Where are they now?
- ↳ News Items
- Help
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18
- ↳ G80 Harris
- ↳ G9 / AJS Model 20
- ↳ G11 / AJS Model 30
- ↳ G12 / AJS Model 31
- ↳ G15 / AJS Model 33
- ↳ Competition / Racers
- ↳ Prewar
- ↳ Two Strokes
- ↳ Pre-War
- ↳ Post-War Classic
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18 / Harris
- ↳ G9 / Model 20
- ↳ G11 / Model 30
- ↳ G12 / Model 31
- ↳ G15 / Model 33
- ↳ Modern AJS
- Sections
- ↳ Bristol
- ↳ Cheshire and North Wales
- ↳ Chiltern
- ↳ East Berkshire
- ↳ East London and Essex
- ↳ East Midlands
- ↳ East Suffolk
- ↳ East Yorkshire
- ↳ Fenrunners
- ↳ Hampshire
- ↳ Heart of England
- ↳ Kent
- ↳ North East
- ↳ Notts and Derby
- ↳ Oxford
- ↳ Poachers
- ↳ Surrey
- ↳ Sussex
- ↳ Wey Valley
- ↳ Worcester
- ↳ France