G2 CSR Gearbox

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Locked
basketcase
Posts: 141
Joined: Sat Jan 15, 2005 12:00 am
Location: STAFFORDSHIRE UK

G2 CSR Gearbox

Post by basketcase »

There is a small oil leak coming from the kickstart shaft. Before I take off the end plate to renew the seal is there any other seals/parts I should renew whilst in there just to be on the safe side.There seems to be a little bit of `play` in the kickstart lever, meaning it takes about 1/2-3/4" before anything happens, is this normal?
Cheers, basketcase.
Top
Locked

Return to “G2 / Model 14”