Number plate size for a G2 CSR???

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Posts: 24
Joined: Mon Apr 28, 2008 11:44 am
Location: ESSEX UK

Number plate size for a G2 CSR???

Postby paul miles » Thu Jun 05, 2008 6:32 pm

Hi All
Can anyone tell me the correct size number plate for the above machine????
Ive looked at some on line and they appear to be 7" x 6" which seems too small for the mount at the rear. I know you can have them made to size, but what size should it be???
Regards
Paul M

Member
Posts: 2439
Joined: Mon Jan 01, 2001 12:00 am
Location: NORTHAMPTONSHIRE UK

Number plate size for a G2 CSR???

Postby lawrence » Thu Jun 05, 2008 11:27 pm

Hi Paul
Does this not take the same (shaped) rear plate as the other CSRs?

If it does, Jampot Spares sell them.

Posts: 24
Joined: Mon Apr 28, 2008 11:44 am
Location: ESSEX UK

Number plate size for a G2 CSR???

Postby paul miles » Fri Jun 06, 2008 3:08 pm

Hi Lawrence,
I never gave Jampot spares a thought, do they need all the legal stuff to do them or are they what they call show plates??? I dont mind Show Plates as long as they are good quality.
Thanks for your interest
regards
Paul

Member
Posts: 2439
Joined: Mon Jan 01, 2001 12:00 am
Location: NORTHAMPTONSHIRE UK

Number plate size for a G2 CSR???

Postby lawrence » Sat Jun 07, 2008 9:16 pm

Hi Paul
They don't make up numbered plates.

I meant the shaped number plate (pressed steel) which you then paint and apply the self-adhesive numbers to. I have just checked Jampot Spares and they seem to have sold out of csr ones (if it is the same) Sorry.

Edited by - lawrence on 08 Jun 2008 9:54:56 PM

Posts: 24
Joined: Mon Apr 28, 2008 11:44 am
Location: ESSEX UK

Number plate size for a G2 CSR???

Postby paul miles » Wed Jun 11, 2008 5:39 pm

Hi Lawrence,
Thanks for your help,
Regards
Paul M

Return to G2 / Model 14

Who is online

Users browsing this forum: No registered users and 2 guests