Routing Throttle and air slide cables

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Posts: 61
Joined: Sun Apr 25, 2010 9:30 pm
Location: LONDON UK

Routing Throttle and air slide cables

Postby StuBaker » Sat Jul 23, 2011 9:15 am

With the tank off (14CSR) and handlebars on I am refitting the carb' when I see the hole in the front tank mount ... why is it there? Fed carb' cables through, it seems to work, keeps them out of the way, nice smooth path through the head steady mount too ... is this what the makers intended?
Thanks
Stu

Member
User avatar
Posts: 1441
Joined: Sat Oct 09, 2010 8:17 pm
Location: SWANSEA UK

Routing Throttle and air slide cables

Postby cbranni » Sat Jul 23, 2011 6:47 pm

Only my opinion.........the hole is for location peg in 2nd op press tool for forming the bracket after piercing and blanking first op. I didnt use the hole for routing but if you are happy with it, use it, it may be there for that very reason
Colin
only dead fish go with the flow

Posts: 61
Joined: Sun Apr 25, 2010 9:30 pm
Location: LONDON UK

Routing Throttle and air slide cables

Postby StuBaker » Sat Jul 23, 2011 7:09 pm

That sounds more likely, a happy coincidence?
Thanks

Return to G2 / Model 14

Who is online

Users browsing this forum: No registered users and 1 guest