Routing Throttle and air slide cables

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Locked
StuBaker
Posts: 61
Joined: Sun Apr 25, 2010 10:30 pm
Location: LONDON UK

Routing Throttle and air slide cables

Post by StuBaker »

With the tank off (14CSR) and handlebars on I am refitting the carb' when I see the hole in the front tank mount ... why is it there? Fed carb' cables through, it seems to work, keeps them out of the way, nice smooth path through the head steady mount too ... is this what the makers intended?
Thanks
Stu
cbranni
Member
Posts: 1439
Joined: Sat Oct 09, 2010 9:17 pm
Location: ABERTAWE UK

Routing Throttle and air slide cables

Post by cbranni »

Only my opinion.........the hole is for location peg in 2nd op press tool for forming the bracket after piercing and blanking first op. I didnt use the hole for routing but if you are happy with it, use it, it may be there for that very reason
Colin
only dead fish go with the flow
StuBaker
Posts: 61
Joined: Sun Apr 25, 2010 10:30 pm
Location: LONDON UK

Routing Throttle and air slide cables

Post by StuBaker »

That sounds more likely, a happy coincidence?
Thanks
Locked