crankcase joint

lovemotorbikes · Post by **lovemotorbikes** » Fri Oct 14, 2011 5:27 pm

hey peeps, what is the recomended type of jointing goo for my cases, is it a type of hermatite ??????? any help apreciated, dave

Chazzyb · Post by **Chazzyb** » Fri Oct 14, 2011 6:00 pm

Wellseal is thought well of, though I use Hylomar.

lovemotorbikes · Post by **lovemotorbikes** » Fri Oct 14, 2011 7:21 pm

thanks charles,any specific type??dave

StuBaker · Post by **StuBaker** » Sat Oct 15, 2011 8:58 am

Just rebuilt my 250 CSR with Wellseal from JSL and it seems to be leak free at present, strangely not so good on the gearbox!

rex.webb · Post by **rex.webb** » Sat Oct 15, 2011 10:15 am

Keep an check on that
GEAR BOX !! OIL LEVEL !!
The cause of many folks having trouble,s.
RIDE with CARE and LIVE LONG to ENJOY your BIKES and Scooters.
Insured with Peter James.

lovemotorbikes · Post by **lovemotorbikes** » Sat Oct 15, 2011 2:46 pm

thanks to one and all,should be together in the next week,oops almost forgot,...is it case in the oven to pop out the drive side bearings. dave

theroof · Post by **theroof** » Sun Oct 16, 2011 11:27 am

just rebuilt my crank case`s and gearbox and used ABRO blue RTV silicone gasket maker,seems ok even cured the very bad leak I had on gearbox. only warning is apply very very sparingly.