I had a look and the centre holding nut had come loose. I fixed it tight again but I think it'll probably work loose with riding.
When I get my workshop I will strip it down and put locktight on. I could only count/see 8 plates. I'm pretty sure I should have 9 being a CSR, is the inner one out of view?
- New Users
- Board index Help G2 / Model 14
-
- It is currently Thu Mar 28, 2024 10:41 pm
- All times are UTC
Clutch problems
Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
-
- Posts: 26
- Joined: Sat Nov 05, 2011 4:57 pm
- Location: EAST SUSSEX UK
Jump to
- Public Forums
- ↳ General Topics
- ↳ Modern AJS
- ↳ Help
- ↳ Frequent Questions
- ↳ Recommendations
- ↳ Where are they now?
- ↳ News Items
- Help
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18
- ↳ G80 Harris
- ↳ G9 / AJS Model 20
- ↳ G11 / AJS Model 30
- ↳ G12 / AJS Model 31
- ↳ G15 / AJS Model 33
- ↳ Competition / Racers
- ↳ Prewar
- ↳ Two Strokes
- ↳ Pre-War
- ↳ Post-War Classic
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18 / Harris
- ↳ G9 / Model 20
- ↳ G11 / Model 30
- ↳ G12 / Model 31
- ↳ G15 / Model 33
- ↳ Modern AJS
- Sections
- ↳ Bristol
- ↳ Cheshire and North Wales
- ↳ Chiltern
- ↳ East Berkshire
- ↳ East London and Essex
- ↳ East Midlands
- ↳ East Suffolk
- ↳ East Yorkshire
- ↳ Fenrunners
- ↳ Hampshire
- ↳ Heart of England
- ↳ Kent
- ↳ North East
- ↳ Notts and Derby
- ↳ Oxford
- ↳ Poachers
- ↳ Surrey
- ↳ Sussex
- ↳ Wey Valley
- ↳ Worcester
- ↳ France