matchless G5 wiring harness/loom

Information relating to the Matchless G5 or AJS Model 8 350cc Lightweight
Posts: 4
Joined: Thu Aug 31, 2017 6:41 am
Location: kent

matchless G5 wiring harness/loom

Postby matt cooke » Thu Nov 09, 2017 8:12 am

Hi there

Could anyone tell me the correct wiring harness or loom needed for a matchless G5 350cc as the one on my bike has been badly bodged.

Also looking for a rear sprocket if they are made ??? Long shot I know

Regards Cookie

Committee
User avatar
Posts: 3809
Joined: Mon Jan 01, 1996 12:00 am
Location: EAST YORKSHIRE UK

Re: matchless G5 wiring harness/loom

Postby Janet » Thu Nov 09, 2017 10:13 am

You can buy a new loom from the club. I believe it comes fitted with with the multi-connectors for plugging onto the switches. http://www.amoc-parts.com/store/comersu ... duct=22338

Regarding rear sprockets, they are not being made currently, but some of us have been talking amongst ourselves recently to see if we can get some made.
Image

Posts: 4
Joined: Thu Aug 31, 2017 6:41 am
Location: kent

Re: matchless G5 wiring harness/loom

Postby matt cooke » Thu Nov 09, 2017 10:49 am

Thankyou for the info that's great

Cookie

Member
Posts: 137
Joined: Sat Jan 01, 2000 12:00 am
Location: HAMPSHIRE UK

Re: matchless G5 wiring harness/loom

Postby ajsm18 » Thu Nov 09, 2017 10:52 am

matt cooke wrote:Also looking for a rear sprocket if they are made ??? Long shot I know

I bought a two teeth smaller rear sprocket for my Model 8 from, I think, Sprockets Unlimited, so they are available. It came as a blank but my friend who fitted it (poptsova of this forum) machined out the centre and drilled and fitted it for me.

It may not have been that company but they are at most of the shows I attend. They definitely advertise in Old Bike Mart and are one of the two companies who advertise there. The other may be Sprockets Unlimited, can't remember. So it was probably one of those two who supplied mine.

Anyway, they are available, even if they need to be machined to fit our wheels.

Committee
User avatar
Posts: 3809
Joined: Mon Jan 01, 1996 12:00 am
Location: EAST YORKSHIRE UK

Re: matchless G5 wiring harness/loom

Postby Janet » Thu Nov 09, 2017 1:26 pm

ajsm18 wrote:Anyway, they are available, even if they need to be machined to fit our wheels.
I'll modify what I said.
I can't buy a finished sprocket ready to bolt on my bike. Which is what I would need.
Image

Member
Posts: 2
Joined: Sat Jul 01, 2017 7:20 pm
Location: Finland

Re: matchless G5 wiring harness/loom

Postby Kuppe » Sat Nov 18, 2017 12:28 am


Member
Posts: 2
Joined: Sat Jul 01, 2017 7:20 pm
Location: Finland

Re: matchless G5 wiring harness/loom

Postby Kuppe » Sat Nov 18, 2017 12:31 am

52 Tooth sprocket to fit the 6" AMC hub. As fitted to many James, Francis Barnetts, even some Nortons etc. Made to suit 428 (1/2" x 5/16") chain. Hole in centre is 172mm (6 13/16").

Return to G5 / Model 8

Who is online

Users browsing this forum: No registered users and 2 guests