Mick, Thanks for putting the solution at end of thread.
I,ve just experienced exactly the same symptoms, came across this thread and ‘twas the fibre washer.
ðŸ‘ðŸ‘👌👌
Lack of or Weak Spark
-
- Member
- Posts: 1102
- Joined: Tue Jan 15, 2008 4:18 pm
- Location: SOMERSET UK
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Lack of or Weak Spark
You can also easily get fibre washers in the wrong place. I have also had problems with fibre plug leads, so always use a wire lead. Suppressor should stop TV etc. interference. Hope you kept the old condenser that was working, Many times I have had new duds or new soon soon fail.
-
- Posts: 2886
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Lack of or Weak Spark
Hi Mike
Hope it helped you to get it sorted quicker than me - my issue drove me to distraction for over a week
Regards Mick
Hope it helped you to get it sorted quicker than me - my issue drove me to distraction for over a week
Regards Mick
-
- Member
- Posts: 452
- Joined: Tue May 27, 2003 1:00 am
- Location: SHROPSHIRE UK
Re: Lack of or Weak Spark
Change the condenser test the coil could be breaking down.