G3LS AR UNIT
-
Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: G3LS AR UNIT
Guess minus the clip was the reason the AR unit did not tighten on the mag shaft.
You do not have the required permissions to view the files attached to this post.
-
bob121
- Posts: 291
- Joined: Sat Jan 14, 2017 11:48 am
- Location: WEST MIDLANDS UK
Re: G3LS AR UNIT
Clip and disc. Both now on order. I've never come across so so many codges and alterations on one machine. There are too many to remember, let alone list. 
-
ajscomboman
- Member
- Posts: 3967
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: G3LS AR UNIT
All those bits and bobs will now, or are now available from the parts service, all part of the overhaul that's currently being undertaken. Seems lots of parts are now readily out there but weren't being stocked for whatever reason.
-
Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: G3LS AR UNIT
Well at least the mystery of why the AR unit will not tighten on the mag shaft should be resolved, when it gets all its bits in place. Guess they got lost? some time between when the bike last ran and the timing was done, which failed to happen due to lost bits. I do not think there is an illustrated parts list for the SR1 A/R unit. I got the pic's I posted, off e bay, so may not be quite correct for G3LS SR1 mag.