Clutch
15 posts
• Page 2 of 2 • 1, 2
Re: Clutch
Are all AMC 3 spring clutches the same regardless of model? I need to source a spider, so am wanting to confirm if 043443 is the badger?
Re: Clutch
There are 2 lengths. 040385 is for 3 plate clutches and is 1 25/32" free length. 040358 is for 5 plate clutches and is 1 11/16" free length.
Dave.
Dave.
Re: Clutch
Thanks Dave but I wasn't very clear.. I have a 3 spring AMC clutch but missing the spider. Are there more than one type of these?
Re: Clutch
Hi
There are two 'spiders' listed: 043443 for the 650 STD and CSR - 040354 for the rest - if you have the correct five plate clutch installation you will need the 043443 part.
As an aside, the Nordlock washers that Pharasee linked earlier in this thread can be obtained from Grampian Fasteners in Dyce, I'm going to give one a go on my current restoration.
Regards Mick
There are two 'spiders' listed: 043443 for the 650 STD and CSR - 040354 for the rest - if you have the correct five plate clutch installation you will need the 043443 part.
As an aside, the Nordlock washers that Pharasee linked earlier in this thread can be obtained from Grampian Fasteners in Dyce, I'm going to give one a go on my current restoration.
Regards Mick
Re: Clutch
Mick D wrote:
if you have the correct five plate clutch installation
Now there's the question!!
Thanks for confirming, and do let us know how you get on with the washers.
15 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 13 guests