Few Niggles before I buy a 57 G3

Information relating to the Matchless G3 or AJS Model 16 350cc Heavyweight
Member
Posts: 47
Joined: Mon Jan 11, 2021 3:52 pm
Location: Nottingham England

Few Niggles before I buy a 57 G3

Postby Oasist1980 » Fri Jan 15, 2021 8:24 am

Looking at getting 57 G3, the guy says there’s play in the front wheel bearing, how easy are these to change and are there 2 needed?

There is a slight leak in the black tin primary case, how easy to sort?

Speedo and maybe mile metre playing up

He’s wanting £3100, is this about right? The overall condition looks good for the year.

Member
User avatar
Posts: 146
Joined: Sat Sep 14, 2019 4:50 pm
Location: Bristol & East Devon

Re: Few Niggles before I buy a 57 G3

Postby Rosy » Fri Jan 15, 2021 9:04 am

Sounds about right £3100 but don't expect it to end there, mine looked good for the year similar price, £600 later! now it looks good.

Member
Posts: 2486
Joined: Mon Mar 24, 2014 5:44 pm
Location: Aberdeenshire

Re: Few Niggles before I buy a 57 G3

Postby Mick D » Fri Jan 15, 2021 9:14 am

Hi

Wheel bearings are adjustable so may just need the play taking up. If not, a new wheel spindle and bearings assembly will set you back around £200, not too difficult to replace.

Tin case leaking - sortable, there are 'improved' seals available for after any defects with the cases have been sorted - easy fix but may require a bit of patience to get it oil tight ;)

Plenty of places will repair / restore Smiths Chronometric speedos, give a few a call for estimates

A top notch 57 matching numbers G3 may just make £4000 - does this one have matching numbers / dating certificate?

Don't forget to join the Club if you buy it ;) - in fact, join the Club if you're looking to buy an AMC machine ;) ;)

Regards Mick

Member
Posts: 1050
Joined: Mon Jan 01, 1990 12:00 am
Location: WEST SUSSEX UK

Re: Few Niggles before I buy a 57 G3

Postby g80csp11 » Fri Jan 15, 2021 9:34 am

new wheel bearings are available if required for £160

https://www.ebay.co.uk/i/264358197908

Return to G3 / Model 16

Who is online

Users browsing this forum: Greybeard, spookefoote1956 and 12 guests