Which Grease Gun

[oasist1980_LAPSED]

Looking at getting a grease gun that will fit all the nipples on my 57 G3LS any recommendations?

Cheers guys

[Samuel]

Well we need to see your nipples first!

[dave16mct]

I hardly ever bother with the grease gun. There's only the speedo drive that's worth greasing, and the brake pedal. On the headstock bearings the grease just fills the frame up, it never gets near the bearings. Same on the hubs, you're more likely to grease the brake shoes than the bearings. You can always remove the grease nipple, replace with a modern one, use your standard gun then put the old one back. Otherwise get a small push Tecalamet gun.
Dave.

[SPRIDDLER]

Have you had any visitors today?
You asked exactly the same question a month ago........with these replies:

http://www.jampot.com/forum/viewtopic.p ... un#p230759

[56G80S]

+1; I've also done that before.

Johnny B

[oasist1980_LAPSED]

Have you had any visitors today?
You asked exactly the same question a month ago........with these replies:

http://www.jampot.com/forum/viewtopic.p ... un#p230759

so i did